Top Tips to Repair Car Dent

Top Tips to Repair Car Dent

Car Polish Service can also help with dented car but is there a way to repair it yourself?

It is inevitable for novice drivers to drive out of the door. Even the experienced driver, and sometimes there will be small accidents, so dented door is a common thing.

First of all, if you are too lazy to think, the easiest way is to buy car stickers. Now there are many personality stickers available, which can conceal and add personality while saving money. This is a good way!

Secondly, to restore dent by yourself, you need to use some tools to directly purchase sucker bridge-type repair equipment online. This device can restore the dented area by sucking and pulling through the suction cup, as long as you the instructions can be operated, it is still very simple.

If you are not in a hurry to use the car, you can drive the car to a nearby repair shop. The repair tradesman will do sheet metal repairs according to the conditions of our car. However, it usually takes 3-5 days to pick up the car.

Sometimes is just too serious to be repaired. You can only be replace the parts, if there is a nearby auto parts store, go directly to the shop to buy the parts and then repair shop repairs, to the repairman working hours on it, so you can save some money and time at least it is guarantee that you bought the accessories do not need to worry about the replacement parts cost in repair shop.

Lastly, please do a good job of protection and prevent the denting your car. You can put protective cover on the door and prevent the door from hitting the wall or other sharp objects causing secondary dent or scratches.

After repairing car dent, do consider a basic polish service to protect your car paint is important to. Do ask for our car polish package!

Top Tips to Remove Car Scratches

Top Tips to Remove Car Scratches

Car Scratch is always a annoyances to Car owners. There will be some scratches on the car body, some of these scratches are due to driver own factors, and some are due to the combination of pebbles and other factors. After the scratches are generated, they affect the appearance of the car. So, let’s share it today: Easily remove the scratches on the car.

Tip 1: Car Polishing

One of the tricks for resolving scratches on a car is to polish. For such small scratches, use a polisher to gently toss a few places in the scratched area, turn back and forth, and then use a small one. The towel was wiped clean, and the scratches flew away a lot, but inadvertently can’t really see it.

Tip 2: Car Waxing

The second method to solve scratches on the car is to use the body wax for waxing the entire line to repair it. If it is only scratching the surface paint, you can use the car wax to repair the entire line. The wipe method is a straight line wipe. After the scar disappears, wipe it with a finer mixture and then wax it. When waxing, choose a wax of good quality. Otherwise, it will not play a role, but it will add to the damage of the paint.

Tip 3: Use toothpaste

One way to solve scratches on cars is to use toothpaste to repair scratches. Smeared a little toothpaste on the scratches, and then slowly wipe, you can also get rid of scratches, this is because the toothpaste contains tiny particles, through the role of the wipe, the scratches will be ground off.

Tip 4: Use paint pen

The method to solve the scratch on the car is to use a paint pen to eliminate scratches. The premise is that you want to know what color your car body paint, and then buy a paint pen corresponding to the color on it, and shake well before use to make the paint uniform, and then gently click on the scratches.

Tip 5:  Use nail polish

One trick to solve small scratches on the car is to use nail polish. The principle is the same as applying paint pens. Choose the same color of nail polish as the body color. Carefully brush a brush at the scratch. After the nail polish is dry, wipe it with a towel.

Tip 6: Water sandpaper polishing

The polishing of water sandpaper is also a skill to remove small scratches on the car. Prepare an 800# sandpaper, clean the area with the scratch, wipe it dry, and then use sandpaper to dip the water to smooth and smooth the scratches. You should pay attention to your strength and don’t wear it for too long, otherwise you will grind it out.

Tip 7: Use Colored putties

For deeper scratches, especially deep and slender wounds repair with putty. Clean the car body’s scars, grind them with sandpaper then apply putty. When applying, make sure that the putty is completely inside, and then apply a mixed dose and wax.

Tip 8: Use scratch repair kits

To remove small scratches on the car, you can also use the scratch repair kit to remove scratches. However, the required operation steps are also more than the above-mentioned repair methods. Specifically, the scratch area is first cleaned and wiped, and then the water is applied on the 800# sandpaper to smooth the scratches and fill the soil. It needs to be carried out several times. After the soil is dry, it is polished with 800# sandpaper and the surrounding area is polished with 2000# sandpaper and then the surrounding area of the paint is covered. The scratches are cleaned again and then sprayed. The same color primer, spray paint when the attention distance should be greater than 15 cm, a small number of multiple spray paint, until the same color primer dry 15 minutes, then spray the same color paint dry gold light oil spray, after drying to complete the touch up After 24 hours, the grinding and waxing of the touch-ups is again performed so that it can be combined with the original paint color of the vehicle body.

Hope you enjoyed the tips and the key is to clean your car first before applying the remedies.

Alternatively, you can leave it to the pros, our team can help you access your car scratches, let you know if basic polishing can help for you before proceeding. Just come over to us!

The more expensive car wax, the better? The car wax selection and precautions

Waxing is an important step in car grooming. Many car owners have limited understanding of this, either extremely emphasizing on car waxing or simply ignore this part. Some car owners judge the quality of wax by the price, so they prefer to use imported car wax. In fact, this is not really true. In the following, we will further introduce to you about the choice of car wax and the precautions for waxing. Hope it could help you with better understanding.

  1. Various types and choices of car wax

There are a wide variety of car waxes on the market, ranging from solids and liquids, to top-end and mid-range, and domestic and import options. Due to the different quality of various waxes, their effects are not the same. The improper selection not only will not protect the body, but also discolors the paint. Under normal circumstances, it should be based on the characteristics of car wax, the newness of the vehicle, paint color and driving environment and other factors. For limousines, high-grade car wax can be used; new car is best to use color coating wax to protect the car body’s luster and color. During summer it is suitable to use UV protection car wax; when the driving environment is poor, it is more suitable to use protective resin.  As for normal vehicles, use regular pearl or metallic paint series car wax. Of course, the choice of car wax must also be considered when adapting to the color of the car paint. Generally, dark car paint uses black, red and green series of car wax, and light colored car paint uses silver, white and pearl color car wax.

  1. Car waxing matters needing attention
    (a) The new car should not be waxed as the paint on upper layers of the car wax are protected, but too early to wax a new car will remove the original wax on the surface of the new car, which become a waste. Generally, new car will not have the rush to wax within five months of buying it back.(b) To master the frequency of waxing. The time interval for waxing should also be different due to the environment in which the vehicle is driving and the parking place. Generally, there are garages for parking, and vehicles that are mostly on good condition roads, then the wax shall take once every 3-4 months. For vehicles parked in the open air, it is best to apply wax every 2-3 months due to wind and rain. Of course, this is not a rigid rule. When the body is generally not smooth, it can be waxed again.
    (c) Before the waxing, it is best to use the water to clean the dirt and dust on the exterior of the body. Remember not to use detergent and soapy water blindly, as the sodium chloride ingredients contained in it will attack the paintwork, wax film and rubber parts of the car, which will make the car paint lose luster and the rubber parts will age. If there is no special car wash water, the vehicle can be washed with clean water and the car body can be wiped dry and then waxed.(d) When waxing, apply a proper amount of car wax to the sponge block and apply it on the car body in a straight line. Do not pour the wax liquid on the car or paint it in circles; Stop; general wax layer smeared after 5-10min with a new towel to polish, but fast car wax should be coated and polished.

    (e) After the car body is waxed, some car wax will remain in the gaps between the lights, license plates, doors, and luggage compartments, making the car body look unattractive. Wax scales in these areas may rust if not cleaned in time. Therefore, the wax must be completely removed after the wax is finished, so as to obtain a perfect waxing effect. In short, like people need beauty care, cars need to be waxed in order to maintain a more beautiful and beautiful car capacity.

     

How to easily prevent car paint oxidation and cracking

First, paint oxidation:

The car under the sun’s ultraviolet radiation for a long time and the paint became oxidation, the brightness will be greatly reduced too. As a result, the paint surface will slowly whitish, forming an oxide layer, shortening the life of the paint. The lacquer is lacquered, whitened and dull, giving the impression that the car is getting old. Prevention: Waxing is the best way to prevent oxidation of paint. The wax plays a role in sealing, a protective film is formed on the surface of the vehicle paint to inhibit the oxidation effect of external harmful components on the vehicle paint. Treatment: Oxidation of the paint can be handled by grinding and polishing. After grinding and polishing to remove the paint oxide layer, the vehicle can be rejuvenated and the color is restored to the state of the new car temporarily. At the same time, it can also be sealed and coated. Sealing glaze can increase the sealing degree of paint, and it is also resistant to high temperature and ultraviolet radiation. The coating is applied to the surface of the car paint protection film to play a role in protecting the car paint.

Second, cracking: If you do not do some necessary care on the paint surface at ordinary times, the metal paint may produce a very fine crack, it will continue to penetrate the car paint until it “breaks through” the entire paint layer, this phenomenon is called “cracking” It usually happens on metallic paint. If the cracking at the initial stage the cracks are difficult to find and become more obvious. Prevention: Regular waxing can reduce cracking. Disposal: Can only remove the paint thoroughly from the metal surface and repaint the car

How to choose the detergent when doing car wash

Many car owners who care a lot their cars and like to wash their cars by themselves. Washing a car during leisure time is really good, but with limited knowledge on DIY car washing, it may lead to certain level of damage to your car. Therefore, it is best to leave it to a professional car wash center. Car wash is the most basic car maintenance, many people think that as long as the clean everything is OK. But if you look at it from a professional perspective, there are more to understand.

Study 1: The choice of car wash cleaners

We must use the right car wash detergent/soap. Avoid strong alkaline detergent or soap powder, as the detergency is too strong, which may cause damage to your car. Frequently use them may cause the body surface lightness be eroded soon and will accelerate the aging of body rubber parts, tires, windows, and so on. The correct car washes should be car wash-specific car detergent, and the water-based wax car wash will the best choice. Professional car wash liquid PH value is neutral, will not erode the car surface. It contains water wax components, at the same time giving the car body a moisturizing and maintenance effect. Even we do car wash often, it will not damage the car paint, but to add on the brightness of the surface after the wash. Therefore, try to avoid doing car wash yourself.

Study 2: Pre-wash procedure

When your car is full of dust and dirt attached to the car body. If you come up with a water gun and rub with a sponge, you are like scrubbing your car, where you can imagine the consequences: scratches all over the car surface! Professional car wash will perform a pre-wash procedure before car washing. Professional car wash will use a special equipment to spray a special pre-wash solution on the body and wait a minute or two. After soaking, most of the sand can be separated from the car paint, and then rinsed with a water gun to avoid scratching the car. This will avoid the risk of causing the car scratches.

Study 3: Selection of Tools and Supplies

You shall have suitable equipment when doing your own car wash, the tools include suitable sponges for wiping the body and wash tires, long brushing for washing the rims, and shall not be mixed together. Also, follow the principle of the top down when washing the car. Use a soft towel to dry the water stain on the car body and use a professional wet or dry vacuum cleaner to vacuum the inside of the car.

Study 4: New technology of car wash

With the specialization and gentrification of car washing, many car owners are not satisfied with traditional car washing. The traditional are gradually replaced by new technology.

a) Fine wash

According to the different parts of the car body, different washing liquids are used for fine washing, so as to achieve the most professional car washing effect. For example, finely wash the windshield with a professional windshield washer fluid, retread tires with a professional tire polishing solution, use a professional rim washer fluid to wash the rims, clean the interior compartment with a professional leather cleaner, and so on. Of course, such fine washing charges are higher than ordinary washing methods, but the equivalent of a small beauty is still very attractive.

b) Engine fine wash

Many people do not value the cleaning and maintenance of the engine, having the thought that washing engine compartment is not a necessary thing to do. In fact, perception is incorrect. From a different perspective, why does the high-end car have a guard plate at the bottom of the engine room and can prevent sediment from entering the engine room? This answer is very obvious. Whether the car maintenance is good or not, it is all judging by the engine. In order to make the heart of the car works well, professional cleaning is necessary. Clean the engine must go to a professional car beauty shop. Before cleaning, all kinds of important joints must be wrapped with film, and then use a professional detergent to clean each part, and then wash and dry with water, can not be washed directly with a high pressure water gun, and finally use a variety of rubber protection agent to the cabin. All kinds of rubber glazing are protected. In addition to the above, other things such as whether there is chassis washing equipment at the construction site, the quality of construction workers, whether the management is standardized, and whether the speed is appropriate, etc., are all shall require the attention when doing the car washing.

 

Be caution if you do car wash on your own

Very often we might only emphasize on the cleanliness of the car surface but we have ignored the importance of the interior cleanliness

People who love cars will not let their cars be dirty, and those who are industrious will do their own car wash. However, we shall ask ourselves a question here: Is it really clean when the outer part pf the car looks shining? The answer is definitely negative. We might often ignore the details so here we reveal the truth to you.

Fender

Most of the time we forgot the fenders. Perhaps the car owners who were attentive may have wash it, but have they really rinsed it completely? When washing into the fenders, the inside is cleaned. In addition to the cleaning suspension, there is also a place that is easily missed, which is the outside edge of the fender right above the wheel. Some of them will accumulate a lot of debris such as gravel, and you should pay attention to this part when doing the cleaning.The gap between the fenders and the skirt must be cleaned. Otherwise, it is easy for the car paint to be eroded due to the accumulation of oil and sand and the fenders are damaged.

Side mirrors

It is necessary to dry the vehicle body after washing. Quite often that we will easily overlook the rotation part of the side mirrors. If it is not cleaned for a long time, it will accumulate a lot of dust and oily particles. When washing the car, if this part is not taken care good enough, it is easy to leave black sewage and when the vehicle is moving, the wind will promote the discharge of sewage, and it will leave an obvious stain there. Therefore, please note that when cleaning the vehicle, do not ignore this part, turn your side mirrors, clean and dry the water stains.

Engine compartment

The engine compartment is also an easily forgotten part. In fact, the cleanup time of the engine room does not take too much time, and it is not difficult, but many owners are not aware of this. If it is not cleaned for a long time, it will accumulate a large amount of dust, and may shorten the life span of the circuit elements and became aging easily, which this is unfavorable for the car and will increase the unnecessary cost of the car.

After cleaning the car, it is necessary to clean the engine compartment by wiping the water from the edge of the engine cover. The easiest way is to use a wrung wet towel, the engine, the battery, and the cover plate. Parts that have water stains can be wiped clean, and the entire process does not take very long time.

Interior

If the interior cleaning is not done perfect, it will generate the odor of your car interior. You can choose some special foam agent to clean the car interior to wipe the instrument panel, center console, door, central armrest , seats, this will not only make the car clean and tidy, reduce odor, but also a lot of beauty. Do not forget the door seals, which should also be cleaned carefully. door seals have a lot to do with the noise and seal in the car, and are very easy to age. When the door seals are aging, they have to be replaced and this cost you unnecessary expenses as well as your personal time.

Footpad

Generally the floor mat is the dirtiest part with bacteria, but often when cleaning, that is, take out the mat to take a shot, put the dust and the shoots the sand out. Such a cleaning method does not take much effect. It is suggested that when you wash your car, you still have to take out the floor mat. If you have a vacuum cleaner, you can suck out the dust, sand and other foreign objects. There is no vacuum cleaner to take a shot. Then use it to clean and dry, so as to prevent car smell more effectively. Lastly, let’s remind you that the floor mats are part of the ensuring the driving safety, so we must choose the suitable floor mats.

In summary, cars are personal items that every car owner shall take care of. Cherish your own car, keep it clean, at the same time, they are comfortable to drive, comfortable to sit, at least maintain a good cleaning and maintenance of your cars will save you much peace of mind in the future.

Do not roll your window down within 3 days after tinted the car window

Since the window film and glass are not completely attached after the film is covered, please take note that within 3-7 days after the film has been applied on your glass:

  1. Do not roll down the window within 3 days after applying the film. This is because the window does not completely attach with the window, and may cause the displacement of the insulation film.
  2. Do not clean the insulation film or turn on the defogging line switch within one week after film application.
  3. Do not wash the surface of the membrane with a solution containing alcohol or ammonia. This irritating agent will affect the effective functional ingredients in the solar insulation film.
  4. Do not use sharp objects to remove the edges of the membrane to prevent it from entering dirt.
  5. If bubbles appear after filming, they must be processed in the construction shop within 24 hours.
  6. Do not let the air-conditioning wind blowing against the film, so as to avoid severe thermal expansion and contraction.
When The Vehicle Is Parked For A Long Time, Should The Oil Be Changed?

When The Vehicle Is Parked For A Long Time, Should The Oil Be Changed?

Consider a case where a car has been left idle at home for nearly a year since the last maintenance. During the next school holidays, the owner wants to drive outstation but is worried that it will be unsafe if the car has been left idle for such a long time. Will his car pose a safety hazard? Will he need to change the engine oil?

Everyone knows that changing engine oil is based on mileage of the vehicle. However, if the car has not been running for a long time and the mileage does not meet the oil replacement standard, then is it still necessary to change the engine oil?.

Oil change cycle

The oil replacement cycle must be comprehensively evaluated from two dimensions:
The first dimension is the distance traveled by the vehicle (after the last maintenance). Each vehicle is accompanied by a “Maintenance Manual” when sold. The maintenance specifications for this vehicle are described in detail in this maintenance manual. Due to the difference in brand and engine characteristics, the maintenance specifications for each vehicle are not the same. For example, some suggest replacing engine oil every 5000 kilometers, and some are replaced every 7,500 kilometers. Whether it is the owner’s desire or the after-sales staff’s suggestion, everybody basically has a certain concept of changing their vehicle engine oil based on the mileage of their own vehicles.

The second dimension is replaced by time. If you look up the vehicle maintenance manual, you will find that the contents of the regular maintenance items (such as oil change) in the manufacturer’s vehicle maintenance manual will be marked by a suggested time interval (or other form of remarks) in addition to the mileage.

Why do you need to change engine oil by time?

Under the condition of normal use of the vehicle, the engine oil can achieve important functions such as lubrication, cleaning, cooling, sealing, rust prevention, buffering, etc. through the non-stop circulation during engine operation. The environment in which the engine is operating is “very tough” (high temperature, high pressure, high-speed circulation, etc.), which accelerates engine oil deterioration/decay. If the engine is like the heart of the vehicle, the engine oil is equivalent to the engine’s blood. However, unlike blood in the human body, engine oil is not able to replace itself. Therefore, regular oil change is necessary. But is it still necessary to change the oil for long-term parked cars?

In short, necessary!

First of all, the oil itself is a chemical reagent, so its function and efficacy are of a certain duration. Oil does not appear to be highly alcoholic. The more you place it, the more it becomes “aged,” and the oil added to the engine absorbs moisture from the air, causing the oil to degenerate and emulsify (a white foamy liquid is formed). A deteriorated or emulsified engine oil will lose the oil’s properties, and it will not have the functions described above. If you use engine oil that has deteriorated and fail to run the engine, it has a certain negative impact. In addition to deterioration and emulsification, when the vehicle is idle for a long time after the first cold start, the oil has basically returned to the sump, and there is no oil film protection inside the engine. At this time, the first cold start of the vehicle will cause relative damage to the engine causing excessive wear.

In addition, limited by the current technical conditions, in fact, each time the oil is replaced, the previous old oil cannot be completely discharged completely. In particular, when the vehicle has high mileage, the oil that is deteriorated into a gum will stick to the inner wall of the engine. Therefore, they themselves become “secondary sources of pollution,” and they also aid in accelerating the deterioration of new oil.

How to judge engine oil deterioration?

It may be a bit difficult for non-professional car owners to determine if engine oil is deteriorated. The level of deterioration depends on the type of engine oil used (mineral oil, semi-synthetic oil, synthetic oil), the environment where the vehicle is parked, and the tightness of the oil pan, etc. Generally, if the car owners really care about their cars, and for the sake of proper vehicle maintenance and safety, it is necessary to change the oil according to the time specified in the vehicle maintenance manual.

Other suggestions for not using the car for a long time

If you do not use the vehicle for a long period of time, there will be some depletion of the car’s battery, rusting of brake pads, and added deterioration of rubber components such as hoses, belts and tyres. As such, it is always adviseable to let the car ‘run’ or start up occasionally to allow all the engine parts to be well lubricated. If a car has to be left idle, it is best to start up the car every two to three weeks, if possible. This will not only charge the battery, but also prevent the tyres from losing strength and being deformed; and doing so will help lubricate the engine and protect engine components. If you are on a business trip or travelling, it may be adviseable to ask a friend or family member to help start the vehicle once a week to check if there is any abnormality in the operation of the engine. In this way, you can guarantee that there will be no problems when you use the car again.

Tips to maintain car seat leather

Leather seats are generally maintained using leather professional soft cleaners. The cleaner has the advantages of soft decontamination, no solubility, no harm to the cortex, no effect on the original appearance or brightness of the leather, and has a good maintenance effect on the leather. Under normal circumstances, the new car can be treated after one month, and then it will be kept once a month. In this way, the leather will be kept bright all the year round.

  1. Cleansing: Use a cleaning agent to remove dust and stubborn stains on the leather surface.
  2. Automobile greasing, mending: After greasing it can help the leather supplement nutrition, local wound repair treatment, restore the smooth surface of the leather.
  3. Colour restoration: in accordance with the production process to repair the leather wear, while the leather to restore bright and beautiful colors.
  4. Texture: use a special silk feel agent to make the skin feel softer and smoother.

Car leather seats simple maintenance methods:

  1. Car leather chair away from heat, such as too close to the heat source will lead to dry leather.
  2. Do not prolonged exposure to sunlight, to avoid leather fade.
  3. Regular implementation of cleaning and maintenance, with a semi-dry wet rag to help dust, keep dry, clean.
  4. If get dirt, clean it with a small amount of multi-functional foam cleaning agent, keep the leather surface dry.
  5. Sitting on the seat to avoid the body’s key holder, iron buttons on the clothes and other contacts with the seat to prevent scratches.
  6. To avoid liquid soaking the seats.

How to remove car scratches?

The most vulnerable damage to a new car is the car paint. Inadvertent rubbing or careless car washing can damage the paint. Slight scratches are common and the surface of the paint is whitened. It was that the paint surface was scratched, but there was no primer exposed, so there was no need to touch up the paint. Rubbing with rough wax or a few more waxes, the scratches slowly disappear.

Serious scratching, if you can see the colour of the underlying primer, then look at the site of the scar. In general, bumpers, rear view mirrors, and some car wheel eyebrows are engineered plastic parts that do not rust. There are no big problems other than being ugly. Filling up the paint does not depend on the owner’s own requirements. However, if these severe injuries appear on other parts of the car body, it will need to be refinished, otherwise even if it is a minor damage, the steel plate will begin to rust, and even then it will be difficult to prevent rust.

Refinishing paints should also be selected qualified professional paint factory. No skilled spray painter, no dust-free high-temperature paint shop, it is impossible to obtain a satisfactory spray paint effect. Also to remind everyone is, do not believe that some repair companies advertised as the so-called original paint repair, it is impossible. The reason is simple: The original painting process is to be baked at a high temperature of 200°C. If the finished vehicle is refinished with such a process, there is no fear of any component on the car. Therefore, the paint used for refinishing is specifically designed for low-temperature baking, which is not the same as the original paint.

Secondly, the colour of the refinish paint is formulated before the repair. The reason has already been mentioned above, according to the length of time used, the vehicle’s paint has begun to fade, and completely rely on the original car paint tone tonic, will produce a significant colour difference. In order to match the current colour of the vehicle as much as possible, it can only be adjusted. In addition, in order to prevent colour differences as much as possible, even if only a small body needs a touch up paint, maintenance personnel will re-spray the associated body. For example, if there is a place on the door that needs to be filled, then the repair shop will often use the anti-rubbing strip as the boundary and spray the first half or the second half of the door. In this way, if there is a slight colour difference, it will not be easy to see.